Menu

Printersupportsnumber

Find out here all kind of printer technical support number like hp,kodak ,lexmark,Epson etc

Blog Component

Replace Toner Cartridge on Brother Printer: 9 Steps to take

November 28, 2017

Do you know the correct way to change toner cartridge on your Brother Printer?

If yes then it is fine but if no then this quick guide will help the user to replace toner cartridge of the machine with new one.

Steps to Replace Toner Cartridge on Brother Printer

  1. Always make sure that Printer is turned ON while in order to replace the toner cartridge.
  2. Now, you need to open the front cover of a printing machine.
  3. Carefully remove the drum unit and toner cartridge from the machine. If you are facing any kind of issue while removing toner cartridge then contact Brother Printer Customer Support Experts.
  4. Remove the protective cover from cartridge carefully; this step is needed because it will avoid the chances of incorrect ink cartridge error.
  5. Now you have to carefully place the new toner cartridge into the drum unit.
  6. Clean the corona wire which is situated inside the drum unit by slightly sliding the green tab from right to left and left to right and sometimes carefully.
  7. After executing the above steps carefully, properly install the toner cartridge and drum unit assembly back into the machine.
  8. At last, you need to close the front cover Printer
  9. Finally, you have successfully replaced the toner cartridge.

With the help of above-listed steps, you can easily change the toner cartridge on Brother Printer without any problem. For additional assistance call toll-free 1-800-862-1908 Brother Printer Customer Support Phone Number for technical assistance. The number is available 24/7 round the clock. You can dial the number from anywhere and anytime.

Speed up the Print Spooler of Lexmark Printer within 5 steps

October 25, 2017

Are you using Lexmark printer and encounter slow print spooler issue?

If you are suffering from the same issue then you are landed on the right page. Here we have mentioned steps to speed up the Print Spooler Of printer. OR you can also make a call on Lexmark Printer Customer Support for step by step guide.

Generally, the print spooler slackens down if printing machine goes offline; sometimes it happens when printing jobs throw unexpected errors and issues and you cancel printing jobs that are stuck in the spooler to speed the print spooler.

Sequential steps to Speed up the Print Spooler of Lexmark Printer

1. First, you have to stop all printing process to avoid removing print jobs which you required.

2. Tap on the Start button and in the search box type "cmd". Right click on it and "Run as administrator". Now a dialogue box appears; then tap on "OK" option to let the program to make changes to your PC.

3. In the command prompt type "net stop spooler" and tap "Enter" to execute the command & stop the print spooler.

4. Now enter the following command to remove the stuck print jobs from the print spooler.

Type "del %systemroot%\system32\spool\printers\*.shd" and press "Enter," then type "del %systemroot%\system32\spool\printers\*.spl"

5. Type "net start spooler" & tap "Enter" to restart the print spooler. Now the spooler works at maximum speed.

Hope this blog definitely helps you to speed up the print spooler. If in any situation you are facing any kind of difficulty while speeding the spooler then calls Lexmark Support Number for instant technical help.

Some simple steps for Reset a Kodak Color Ink Cartridge Chip

June 23, 2017

Kodak is one of the leading manufacture of awesome Kodak printer Brand. Kodak printer is known for its high quality printing and reliable features. But sometime we face problems with Kodak printer like paper jam issue, Printer driver installation, ink cartridge and much more due to some hardware or software problem in printer.

Here in this blog we mention some simple steps for how to reset color ink cartridge chip of Kodak printer if it is not work properly.

Below we provide you step by step guidance for How to reset a Kodak Color ink cartridge chip with ease

  • Initially you have to remove ink cartridge from the printer carefully and turn it over.
  • Push the Plastic cover which hold the chip towards the cartridge, then carefully slide the chip in downward direction, until the chip gets removed from body of cartridge.
  • By using wire cutters cut the protective plastic cover or you can say plastic guide off from the cartridge.
  • Then carefully Slide the new replacement chip into place, make sure the chip orientation is correct and its large portion towards the left side of cartridge.
  • At last you have to install the cartridge into your printer for use.

If you are using Kodak printer and facing problem with Kodak printer color ink cartridge chip. And if you really want to fix this then follow the instruction given in blog carefully. If still error is not resolved then no need to worry call @ 1800-862-1908 Kodak Printer Technical Support number for help.

 

Search

Archive

Comments

There are currently no blog comments.